TracerPlus Software Partners Purchase Contact Us
 
Navigation

   Home ı Support ı Knowledge Base

Solution Finder
PTS Software Knowledge Base Knowledgebase Home Page > Hardware Related Topics > Windows Mobile, Pocket PC and CE Devices

Search the Knowledge Base Browse by Category

View Questions by Category:

Dolphin 6100 (3)

Symbol MT2000 (2)

 

Browse "Windows Mobile, Pocket PC and CE Devices" Questions
There were 11 questions found in this category:

  1. I cannot read inverse barcodes with my mobile device (white barcode on black background)
    Install Data Wedge, this can be downloaded from Motorola at http://support.symbol.comOpen Advanced C...
     
  2. How do I enable the scanner on a Datalogic Memor to work with TracerPlus?
    - Click on the Barcode icon in the Windows CE system tray.- Select Wedge if it is not checked.- Clic...
     
  3. Changing the Imager setting on Motorola devices to only read the barcode it is focused on
    This is useful for barcodes that are close together. Normally the imager will pick up either barcode...
     
  4. Warm and cold boot instructions for Windows mobile/CE Handheld devices (Symbol/Motorola)
    PPT8800 Warm Boot Press and hold Enter, Function and Left Scan Keys at the same time and release. Co...
     
  5. My MC3000 is stuck on the Warm Boot screen, I am not able to go any further.
    You will need to do the following:Press and hold the "1", "9" and "Power" keys at the same time. Thi...
     
  6. My PPT8800 will freeze at cold temperatures that are above the specified rating and requires a cold boot.
    This is an acknowledged issue from Symbol and a patch was posted in January addresing it.  To i...
     
  7. How do I enable the scanner on the PPT2800 to work in TracerPlus?
    Go to: Settings-->Connections-->Beam         &nbs...
     
  8. How do I enable the Scanner in new Intermec devices for use in TracerPlus?
    Under  Start-->Settings-->System-->Intermec Settings. Set: Scanners-->Symbolog...
     
  9. How do I perform a Warm Boot of the PPT2700/2800 Handheld Device?
    Hold down the right Up & Down scroll buttons. While holding down above, press the APP ...
     
  10. How do I perform a Cold Boot of the PPT2700/2800 Handheld Device?
    Remove the battery Cover.Press and hold the reset button in the battery compartment.While holding re...
     
  11. How do I perform a Cold Boot of the MC9000 Handheld Device?
    Press the battery release button to dislodge the battery from the compartment. Do not pull out the b...
     


PTS Software Knowledge Base Copyright © 2010 www.tracerplus.com
Powered by ActiveKB Knowledgebase Software

Sales: 877-640-4152 ext. 2
       631-727-8084 ext. 2
Chat Now

TracerPlus News •  Knowledgebase •  Partner Login •  Solution Finder •  Leave Feedback

© 2000-2010 Portable Technology Solutions, LLC. All rights reserved.
No images or content from this website may be used without prior written permission.